Sumi Mark II is cost effective, compact and runs on a low operating pressure and flow rate. Sumi Mark II is SumiSoaker's little brother.
Sumi Mark II is ideal where:
- there is limited operating pressure
- furrows or hilled beds
- need to only water a 5m width
- it is to be left in a semi-permanent position as the hose can be cut to suit
- as a drip or spray irrigation as it can be used in either form just by adjusting the water pressure
- or you're simply looking for a lightwight cost effective watering unit.
Key features and benefits of the Sumi Mark II
- Lightweight and easy to manoeuvre - 100m unit weighs about 5kgs
- Water an area of up to 500m² - equivalent to a full-sized tennis court
- Cost efficient to operate - Sumi Mark II is cost effective and can be used in semi permanent positions if needed
- Low operating pressure - Low operating pressure and flow rate requirements reduce running costs. Max operating pressure is 80kpa (11.6psi)
- Variable length - Using the unique sliding stopper
- Filtration system - Sumi Mark II is available with a special inline filter
- Fine, soft droplets - Maximises ground soakage and minimises run off
- Multiple uses - Like all Sumi Hoses, the Sumi Mark II has a whole range of uses and applications including:
- Gardening: Domestic, commercial or council/government
- Schools: Ag plots, gardens and sporting fields
- Vegetables: Flat furrowed or hilled beds
- Nurseries: Indoor and outdoor
Length |
100m |
Maximum Recommended Operating Pressure**: |
80kpa (0.8kg/cm²), 11.6 psi |
Required Flow Rate per Metre: |
0.5 litres per metre of hose per minute |
Required flow rate/50m |
25 litres per minute |
Required flow rate/100m |
48 litres per minute |
Coverage at Optimum Pressure and Flow Rate: |
5m (2.5m either side of hose) |
Water Application Rate (at max. pressure and max. flow rate): |
Equivalent to 4mm/hour of rain |
Dimensions and Weight: |
30mm diameter / 4kg weight |
Coverage Area: |
Rectangular. Up to 500m² (5m wide x 100m long). Equivalent to a full sized tennis court. |
Hose Connection: |
Supplied fitted to 12mm (1/2”) tap nut |
Operating Length: |
Adjustable operating length using sliding stopper |
Tube Width (Flat): |
50mm |
Tube Diameter (Inflated): |
20mm |
Number of Holes: |
4 holes/320mm of tube |
Material: |
Special black polyethylene |
Filter: |
181 micrometer = 100 mesh |